|
M-110L Pneumatic
The M-110L produces up to 18,000 psi with standard lab air, for premium results at an affordable cost. Recommended to...
-
Produce stable micro-emulsions & dispersions
-
Increase yield in cell disruption
-
Create finer micro-encapsulations
- Produces up to 18,000 psi process pressure with less than 25 scfm air using 7.5 HP compressor
- Ceramic interaction chamber
- CE compliant
- Polished stainless steel full system enclosure
- Fully CE compliant base unit; inherently explosion-proof
- Small diameter tubing for minimum holdup volume
- 200 ml glass reservoir
- Removable recirculation loop
- UHMWPE (Ultra High Molecular Weight Polyethylene) plunger seal
- Spare parts kit
- Removable cooling coil
- Available in fully autoclavable configuration (place entire unit in autoclave without disassembly)
- 400 ml and/or 1 liter stainless steel reservoirs that allow operation with or without recirculation loop or cooling coil
- Sanitary pressure transducer with flush diaphragm and digital readout
- Autoclavable unit (sterilizable to 121°C)
- Spare interaction chambers
- Recirculation reservoir, 25 ml capacity (14 ml sample size; 12 ml recovery)
- Diamond interaction chamber
- Mechanical pressure gauge
| Pressure Range |
up to 18,000 psi |
| Flow rate Range |
up to 270 ml/min @ 18,000 psi |
| Feed Temperature Range |
maximum 165°F (-25°C to 75°C) |
| Air Compressor Power Requirement |
compressor size and air requirements will vary from 7.5 HP (80 psi, 28 SCFM) to 15 HP (80 psi, 57 SCFM) depending upon selection of interaction chambers |
| Minimum Sample Size |
14 ml with up to 12 ml recovery |
| Dimensions |
23"L x 15"W x 26"H (60cmx39cmx68cm) |
| Weight |
58 lbs. (26.4 kg) |
|
Microfluidizer Processors 
