M-110EH-30 Pilot/Production Processor
The M-110EH-30 is a mobile high shear fluid processor which achieves continuous operating pressures to 30,000 psi (2069 bar).
Recommended for:
- Particle Size reduction for submicron and nano-sized particles
- Deagglomeration
- Cell disruption
- Immiscible liquid emulsions
- Solid-in-liquid suspensions
- Liposomes
The processor maximizes the energy-per-unit fluid volume, resulting in uniform submicron particle and droplet sizes.
Utilizing Microfluidics’ fixed geometry diamond interaction chamber technology, and a ceramic (Zirconia) plunger, the M-110EH-30 is capable of processing a wide variety of fluids such as simple oil-in-water emulsions, solids-in-liquid suspensions, and cell disruptions, including the most difficult yeasts and plant cells, in 1-2 passes. What’s more, the process is repeatable and is guaranteed to scaleup to pilot and/or production volumes.
Download a pdf of the M-110EH-30 technical bulletin
The M-110EH-30 Microfluidizer processor combines superior, scalable results with easy handling and clean-in-place
Process pressure to 30,000 psi (2,070 bar)
- Process pressure to 30,000 psi (2,070 bar)
- Flow rates to 330 ml/min at 30,000 psi (2070 bar)
- Flow rates to 450 ml/min at 25,000 psi (1725 bar)
- Guaranteed scaleup to pilot and/or production
- Patented, wear resistant, diamond interaction chamber - no moving parts
- On-board heat exchanger for consistent discharge product temperature
- Ceramic (Zirconia) plunger for extended seal life
- Designed for clean-in-place with no disassembly required
- Available with steam-in-place (SIP) option
- Available explosion-proof option
- CE compliant (Europe)
- Diamond interaction chamber with ceramic Auxiliary Processing Module (APM)
- Spare ceramic interaction chamber
- Ceramic (Zirconia) plunger for extended seal life
- Stainless steel enclosure
- Electric-hydraulic power unit
- Gauges for measuring process pressure, hydraulic drive pressure, and hydraulic oil level and temperature
- Self-contained unit, mounted on locking casters for portability
- Minimum sample sizes as small as 120 ml
- Feed temperature range 35ºF - 165°F (16ºC - 75°C)
- TEFC (totally enclosed fan cooled) motor, starter, controls and power cord
- 2 liter reservoir
- 2 gallon pressure-type feed tank
- 2 liter pressure-type reservoir
- Solvent seal quench system
- Sanitary flush diaphragm pressure transducer with digital readout
- ATEX - Zone 1
- Steam sterility (or hot water) package
- On-board air compressor for air switch activation
- Interaction Chamber cooling bath
- Explosion-proof design
Pressure Range
|
up to 30,000 psi (2070 bar) |
| Flow Rate |
up to 330 ml/min at 30,000 psi (2070 bar)
up to 450 ml/min at 25,000 psi (1725 bar)
|
| Feed Temperature Range |
35ºF - 165°F (16ºC - 75°C) |
| Holdup Volume |
100 ml |
| Utility Requirements: |
|
|
|
3 phase 60 Hz service, 208/230/460V, 5 HP (3.7 KW) (50 Hz European standard available) |
|
|
1 SCFM @ 50 psi (3.4 bar) with 35°F (2°C) max. dewpoint |
- Hydraulic Oil Heat Exchanger Cooling Water
|
2.5 gpm (9.5 lpm) minimum @ 85°F (29°C) max.
|
- Product Outlet Heat Exchanger Cooling Water
|
5 gpm (18.9 lpm) @ 65°F (16°C) |
Minimum Sample Size
|
120 ml |
| Dimensions |
33”L x 34”W x 58”H (84 x 87 x 148 cm) |
| Weight |
450 lbs. (205 kg) |
|
Microfluidizer Processors 